Problem: crazy music speed while hosting

[Kortiv]

Hello guys i'm not really expert with Winamp/shoutcast, however some months ago i used it for broadcast my own radio channel and it worked perfectly (i still have same pc and connection of then).
This summer i installed Winamp again and there is a problem i can't solve alone
I configured winamp and shoutcast as ever but this time, when i broadcast mp3 files on radio, they start with a long delay, with an extreme speed in reproduction and the audio seems damaged. (if i broadcast my microphone input or my stereo mix everything it's fine)
I also tried to install these softwares on my friend's pc and they works there, i updated my audio drivers but the problem is still there.

Anyone had my same problem? have you some idea? i hope for help guys

P.S. I use win7 (32bit) - audio board is Realteck ALC887 - my net upload 0.80 Mbps

[DrO]

re-select all of the encoding options (especially any relating to samplereate) within the Source DSP.

also make sure that Winamp is set to work in 16-bit audio mode and not 24-bit (via the Winamp playback preferences page).

[Kortiv]

24bit is not allowed and i resetted all encoding options but nothing changed

[Kortiv]

(Encoder type: MP3 encoder
Encoder settings: 56kbps 44100Hz, mono)

[Kortiv]

any idea?

[thinktink]

Do you have a backup file setup and if you do, have you verified that it's the same bitrate/sample-rate/number-of-channels as the encoder? Have you tried deleting the SHOUTcast DSP's config file and then setting up the streams again?

[Kortiv]

Do you have a backup file setup and if you do, have you verified that it's the same bitrate/sample-rate/number-of-channels as the encoder?

yes, i used the same settings as before

Have you tried deleting the SHOUTcast DSP's config file and then setting up the streams again?

yes

[DJ Egg]

Maybe something to do with the mono setting...?
Does the problem persist if you try e.g. 64 kbps, 44100Hz, stereo?

[robtronix]

Hi am also having a similar problem as described by the previous person. Although mine is a new installation. I have a remote server where i have installed shoutcast server v2 and im am broadcasting to it via winamp & shoutcast DSP. I am able to hear the stream when i go to my url for port 8000 but it breaks up and is kind of staticy and it buffers alot. I unchecked the 24bit audio option in winamp under playback and same thing. I have tried all the encoder settings from aac to mps from the lowest bit rate to the highest. Only change is when a lower bitrate is selected it gets lower hard to hear. Only thing i can think is during the initial setup for the shoutcast web page when it was asking to configure the stream i put 512 listeners and unlimited bitrate would this be the cause? I dont know how to reconfigure these settings. I also have the v1 legacy box checked in the winamp DSP im going to uncheck and test that later today. Any help is much appreciated.


Source:
windows 10 64bit
intel Xeon
16Gb Ram
2GB nvidia k620 quadro

Remote Server:
Ubuntu 14.04
2Gb Ram
2Core
48Gb SSD
linode VM